PS1-10C Whole House Replacement Sediment Filter Cartridge
Product details
| Management number | 253424505 | Release Date | 2026/10/24 | List Price | CA$3.80 | Model Number | 253424505 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
The Pentek PS1-10C water filters reduce extra fine dirt, sand, sediment, silt, rust particles, and scale particles. The Pentek PS1-10C water filter is resistant to chemicals and corrosion. The Pentek PS1-10C filter cartridge is designed for purity, bacteria resistance, and chemical resistance. The Pentek PS1-10C spun fibers form a true gradient density from outer to inner surfaces. The Pentek PS1-10C replacement water filter will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit. The Pentek PS1-10C water filters can be used on chlorinated or non-chlorinated water supplies.
NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The Pentek PS1-10C filter is a 1 micron extra fine sediment water filter cartridge made of spun bonded polypropylene. Pentek PS1-10C water filters are manufactured from 100% pure polypropylene. The Pentek PS1-10C water filter cartridges fit in whole house water filter systems and Reverse Osmosis Systems.
Genuine OEM ProductContaminants
Reduces the following contaminants:
- The PENTEK-PS1-10C does not reduce fluoride
Specifications
| Length | 3.75" |
| Outside Diameter | 2.38" |
| Media | Spun Wound Polypropylene |
| Primary Filter Media | Polypropylene |
| Filter Life |
Gallons - 8,000 Litres - 30,283.28 L Months - 2 months |
| Micron Rating | 1 [nominal] |
| Flow Rate |
gpm - 5.00 lpm - 18.93 |
| Operating Temperature |
Degrees Celsius - 4.4 - 62.8 Degrees Fahrenheit - 40.0 - 145.0 |
Comparables
- Pentek PS1-10C Water Filter Replacement Information:
- The Pentek PS1-10C replacement water filter is easy to install in whole house systems or reverse osmosis systems.
- Replace the Pentek PS1-10C sediment water filter cartridge approximately every 2 months or 8,000 gallons of water.
- Pentek PS1-10C Water Filter Equivalent Brands:
- The following Culligan models can use the Pentek PS1-10C filter cartridge: HF-150, HF-160, HF-360, HF-365, RO-2127.
- The following Ametek, USFilter, and Plymouth Products models can use the Pentek PS1-10C sediment filter cartridge: #10 Blue, #10 Clear.
- The Pentek PS1-10C Sediment Water Filter Cartridge fits Culligan, Cuno, AquaPure, Omni, Sears, Fulflo, Teledyne WaterPik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 10" x 2.5" filters
- Pentek PS1-10C = Culligan/USFilter/Ametek/Kleen-Plus PS1-10C, Sears 34362, American Plumber W5P, Ace Hardware 45331, MasterPlumber TrueValue 529-286, Flotec RS3, GE FXUSC.
Bestseller ranking
Cafe Supplies
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form